Table of Contents
Advertisement
Programming
The 2-Button Station can be set in one of four modes as follows:
Remote ON/OFF
Provides control for up to 16 Lytemode Masters (or separate IDs).
In this configuration, the top (ON) button can
be programmed to correspond with any Master
scene (ON, A-L), while the bottom (OFF)
button will always send an off command. The
ON button LED will illuminate when at least
one of the selected IDs are in Scenes ON or A-
L. The OFF button LED will only illuminate
when all selected IDs are off.
To program:
Step 1.
Press and hold TOP and BOTTOM
buttons for 10 seconds. (Both LEDs will start to blink.)
Step 2.
At each Master or Mini-Master station (up to 16), press
a Scene button (ON, A-L).
Step 3.
At 2-Button Remote Station, press TOP button to accept
or press BOTTOM button to abort.
TOP button will not accept an OFF scene. BOTTOM button
Note:
will always default to match TOP button's assignment.
2-Button Remote Station User's Guide
ON
OFF
7
Advertisement
Table of Contents
