Advertisement
3)
Remove the drop-prevention string.
f Remove the hook at the tip of the drop-prevention string attached to
the air filter cover. (Fig. 3)
4)
Pull out the air filter unit.
i) Pull out the air filter unit from the tabs on the projector body (c) while
slightly pressing the grip on the air filter unit (a) inward as described with
the arrow. (Fig. 4)
ii) Pull out the air filter unit. (Fig. 5)
f When pulling out, confirm that the air filter unit comes off from the tabs
on the projector body (d).
f After pulling out the air filter unit, remove large foreign objects and
dust from the air filter unit compartment and the air intake port of the
projector body if there are any.
f When the air filter unit is removed, proceed to "Attaching the long life
filter mount clasp" (x page 8) next.
Attention
f Take care not to touch the radiator fin, etc., when removing dirt or dust.
f Store the removed air filter cover in a safe place.
Attaching the Long Life Filter Unit
ENGLISH - 7
Advertisement
