Panasonic KX-TR320F Operating Instructions Manual page 6

3
To Communicate
3-A Monitor
The monitor function unmutes the speaker in any situation. Use this
function when received signals are too weak to recognize.
You can use the monitor function to check activity on the current
channel before transmission.
1 Press and hold
(MONITOR)
to open the squelch.
≥The TALK/BUSY indicator lights red.
≥You will hear static if the channel is clear for use.
2 Release
(MONITOR)
to close the squelch.
≥The TALK/BUSY indicator light goes out.
≥ If you want to use the monitor privately, open the flip before
pressing (MONITOR) . When finished, close the flip.
3-B Sending/Receiving Messages
1 Check the current channel activity (3-A).
≥Do not talk if someone is already on the channel.
2 Press and hold
(TALK)
to transmit and speak into the MIC
(microphone).
≥The TALK/BUSY indicator lights green.
3 To receive, release
(TALK)
≥The TALK/BUSY indicator lights red.
≥Repeat steps 1 and 2 to continue communication.
≥ To maximize readability of your transmitted signal, pause a few
seconds after pressing (TALK) , hold the unit 2 to 4 inches (5 to
10 cm) from your mouth and speak at a normal voice level.
To select the receiver volume
1 Press
(›) (‹)
or .
≥" VOL " and the current volume level will
flash on the display.
2 Press
(›) (‹)
or repeatedly until the
desired volume level (0–8) is
displayed.
≥Each time you press the button, the
selected volume will ring.
≥To turn the ringer off, select "0".
≥ The key-touch tone will automatically change with the selected
receiver volume.
–6–
¤
.