Channel Scan - Panasonic KX-TR320F Operating Instructions Manual

5

Channel Scan

5-A Finding a Busy Channel
Channel scan allows you to monitor 14 channels and a selected
group code. When the unit detects channel activity on your selected
code, it stops scanning and locks in on the busy channel. You can
listen and talk back (within 5 seconds of the end of a transmission)
on the displayed channel without having to change your settings.
1 Press
(SCAN)
.
≥ "SCAN" will flash on the display.
≥Channel scan starts and monitors the channels in the order as
below.
1-.2-.3- - - - - - - .14
^_______n
2 The unit stops scanning when it finds a busy channel, and
you will hear a message.
≥The TALK/BUSY indicator lights red.
If you want to scan other busy channels, press
≥Channel scan starts again.
3 To transmit on the busy channel, press and hold
within 5 seconds after the message.
(TALK)
To receive, release .
≥If no response is received or there is no key operation for about
30 seconds, channel scan starts again.
4 To end the channel scan, press
≥The unit will return to the standby mode with the preset channel
and group code.
(›) (‹)
or .
(TALK)
(SCAN)
.
–9–
≥ If you want to scan privately, open the flip before pressing (SCAN) .
When finished, close the flip.
≥ In the channel scan mode, you can always transmit on the
displayed channel.
≥ To communicate in channel scan mode, your unit must be set to
the same group code as the other user(s) in your group. If your unit
is set to a different code, the channel scan function will not detect
channel activity in your group.
≥ To scan for radios without a group code, change your group code
to "0" (OFF) before using the channel scan function.
≥ In the channel scan mode, you cannot change the preset channel
or group code settings. To change the preset channel or group
code settings, see section 2.
≥ To scan for radios without a group code, set your group code to "0"
(OFF) before using the channel scan function.
Section 5