Specification Chart; Tools Needed For Assembly - Craftsman 919.16225 Owner's Manual

Congratulations onyourpurchase ofa
Sears Crattsman
Power Washer! It isdurable and versatile ana willserve
you for years to come. Your Power washer combines
air pressurewith water, detergent or degreaser to clean
and degrease, it can also be used for spraying lawn,
garden, trees or bushes, It has a unique nozzle that
allows you to change from a direct, forceful blast to a
light, foliage mist with a push or a pull.
A bleeder type connector has been supplied so that the
power washer can be used with compressors that do not
have a pressure relief valve or a pressure switch.
Your PowerWasher is designed-to spray in the follow-
ing modes:
Air only
• Water only
• Water & air only
,_ AJr & chemicals together
It is not designed to mix water & chemicals internally.
Chemfcals should be diluted with water before enter-
ing the gun to achieve precise control of chemicals,
SPECIFICATION CHART
Your Power Washer is intended for use with a _,._ Horsepower or larger tanl<-lype or tankless air compressors
delivering at least 2.2 SCFM at 50 PSIG. The larger the air compressor used the more powerful your washer
will be.
Minimum Air Pressure;
Maximum Air Pressure:
Minimum Water Pressure:
Maximum Water Pressure;
Maximum Water Temperature:
Maximum Chemical Draw Height:
(maximum distancewasher can be above
the chemical container.)
40 psig
17,5 psig
20 psJg
1O0 psig.
1406F
10 feet
Optimum Chemical Flow Rate in the Air/
Chemical Mode, with the air pressure
salting between 75 and 125 PSIG:
Approx, 10 oz, per minute with _ two foot draw height
Appmx. 7 oz. per minute with a five foot draw height
NOTE: Chemicals should have a viscosity(consistency
or thickness) similiar to water-dilute as
n_cessary.
TOOLS NEEDED FOR ASSEMBLY
2 Wrenches: a _/J"open end wrench for the Bleeder/
Non-bleeder connector and an adjustable wrench for
the air hose,
All other parts on the power washer are tighteneO by
hand,