Table of Contents
Advertisement
Important Considerations to
Follow:
So that a case which endangers your health does not occur during contracted use, read and pay attention
to the notes on safety . The errors made during installation and connecting may harm the device or the
subsequent respective devices.
Always keep the instructions for use ready. Follow the instructions on the device and in the user's manual.
• General references
Please read the general considerations on safety
and user's manual in detail before connecting the
plasma screen. Only by this way you can use all the
functions safely and securely.
Keep the user's manual as close to the device as
possible to search for information. Follow the
instructions on the device and in the user's manual.
Never let the children use the electrical devices
unattended.
• Use
The plasma TV you have purchased has the highest
quality codes and standards possible in this business
line. This plasma TV contains a mass comprising of
pixels. A pixel comprises of three elements (red,
green and blue). Despite the fact that the highest
quality check practices have been used during the
manufacture of screens, that some pixels or pixel
elements are faulty cannot be excluded 100%. These
faults may occur as continuously lighted pixels,
unlighted pixels or unbalanced pixels (flashing).
Therefore, we beg your understanding, stating that
these faults are not covered by guarantee. This is
applicable so long as the total of all the faulty pixels
or pixel elements do not exceed the 0.01% of the
total number. The brightness and contrast of plasma
screen decreases in time. Plasma screens are
phosporus based and in some operating conditions
"Burning" effect may occur. This is actually the natural
deterioration of phosphorus and an ordinary course
in plasma technology.
The operating conditions mentioned above are:
- displaying static images for long durations
- displaying the same background continuously
- using a format other than full screen (e.g. 4:3) for
long durations.
When burning occurs, it is usually not correctable.
Please follow the below listed recommendations to
avoid or decrease burning effect:
- For the first 100 hours of use, please use the
animated pictures or constantly moving still pictures
in full screen mode (slide show).
- Please use your plasma TV in full screen mode
(16:9)
- In case the plasma screen is used as a PC monitor,
please use animated pictures.
Always turn the screen off when not in use.
- Reduce contrast and brightness as far as possible.
- If possible, display the images with maximum
color profundity and scale.
Certain situations may cause a buzzing sound in
the electronics of the screen. This usually results
from the fact that the grounded cables of the
main electric supply are different. A method to
solve this problem is inserting a filter between the
antenna cable and antenna input. These filters
are available at all specialist commercial stores.
If the plasma screen is connected to an external
antenna, it should be grounded to protect it from
electrical dangers and static discharges.
Grounding should be in compliance with the legal
regulations in implementation and be performed
accordingly.
• Environmental Conditions
Never use the plasma screen in the environmental
conditions different from the technical data.
Different conditions endangers the device and
may cause fire or fault.
Protect the plasma screen from humidity. This
refers to high moisture, closeness to water, water
drops and water splashes as well as rain. Do not
put any container full of water (e.g. a vase) on the
device.
Protect the device from heat. Keep away from
flames, heating devices, ovens or continuous
direct sunlight.
Protect the screen against heat accumulation. Do
not cover the ventilation holes. In horizontal
position, keep min.10 cm above and below
ventilation holes to furniture and ceiling and 4 cm
from the sides and the back. Do not cover the
device with veils. The screen has been designed
to be mounted to wall or equipments in horizontal
position.
• Network Connection
Network input and network key is located on the
back side. The network input is located on the
upper right and the network key is located on the
upper middle. To connect the screen to network
voltage, the network key should be switched off
and the network cable should be removed from
the network input module.
Connect the plasma screen to a socket the
grounding contacts has been arranged according
to the regulations and the main voltage to a socket
in compliance with the technical data of the device.
Make sure that the network plug and socket are
always in an accessible position. Insert the mains
lead so that no one gets tripped. Only use the
supplied mains lead. Protect it against any
damages and do not make any modifications on
it. Never use a damaged mains lead.
ENGLISH -4-
Advertisement
Table of Contents
