External Equipment Connections - Beko Plasma TV User Manual

External equipment connection
You can connect to your television many compatible sound and picture devices.
AV inputs:
Press the ( ) button on the remote control. The
Source menu, from which you may select the
access mode will appear on the screen. Here,
you may select any access mode.
TV: While in the AV modes, move onto this option
and press the ( ) button for switching to the TV
mode.
AV1: To watch the picture of the broadcast device
connected to the Scart1, move onto this option
and press the button (
this Scart if there is a RGB output from the device
with which you made a connection).
AV2: To watch the picture of the broadcast device
connected to the Scart2, move onto this option
and press the button (
this Scart if there is a RGB output from the device
with which you made a connection).
S-VHS: To watch the picture of the broadcast
device connected using the S:Video input, move
onto this option and press the button (
AV3: To watch the picture of the broadcast device
connected using the RCA (Cinch) input, move
onto this option and press the button (
PC: To be able to watch the monitor image in
the PC mode, move onto this option and press
the ( ) button.
DVI: To be able to watch the image in the DVI
mode, move onto this option and press the ( )
button.
HDMI: To be able to watch the image when a
connection is made via the HDMI socket, this
option must be selected.
YPBPBR (Component Input): To be able to
watch the image when a connection is made via
the this socket, this option must be selected.
) . (You can watch via
) . (You can watch via
) .
) .
ENGLISH -25-
Connecting a Video Recorder
Device
from the SCART socket
Before making the connections, make sure first
that your television and the video recorder device
are turned off.
Connect one end of the Scart socket cable (not
supplied with the television) to the suitable
connection terminal of the video recorder device
and the other end to the Scart connection point
behind your television.
Turn on your television and video recorder device.
By pressing the ( ) button on your
remote control, select the input AV1,
AV
AV2 to which you connected your device.
Note:
To connect a RGB-supported external device to
your television, it is necessary that you use a
RGB supported Scart cable. If your external
device is supported in that case, you can set the
output as RGB.
Via the RCA or S-Video socket
Before making the connections, make sure first
that your television and the video recorder device
are turned off.
Connect one end of the Scart socket cable (not
supplied with the television) to the suitable
connection terminal of the video recorder device
and the other end to the Scart connection point
behind your television.
Turn on your television and video recorder device.
If the sound is mono, use the Left Audio (L) input
and select MONO from the sound settings menu.
If you would like to use your VCR by connecting
it to your television at the modulator outlet with
an antenna cable, select the program '0' which
is set for this type of connection.