To Set Power Level - Sharp KB-5121K Operation Manual

MULTIPLE SEQUENCE COOKING
The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting
to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power
level. Your Microwave Drawer can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power.
Enter cooking time by touching
1
number pads .
500
Enter second cooking time
4

TO SET POWER LEVEL

There are eleven preset power levels.
Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.
TOUCH POWER APPROXIMATE
LEVEL PAD NUMBER PERCENTAGE
OF TIMES FOR
DESIRED POWER
If Power Level is not touched
Power Level x 1
Power Level x 2
Power Level x 3
Power Level x 4
Power Level x 5
Touch Power Level 3 times to choose
2
70%. You can omit this step when you set
100% power. Touch Multiple Sequence.
Touch Power Level until 50% Stage 2
.
5
3000
appears in the display. Touch START.
COMMON
WORDS FOR
OF POWER POWER LEVELS
100% High
90%
80%
70% Medium High
60%
50% Medium
MICROWAVE DRAWER COOKING
Note that 100% stage 2 appears in the
3
banner.
The display will begin counting down
6
the total cooking time.
During cooking, the power level will
appear in the display. At the end of
Stage 1, the microwave will automatically
change to Stage 2.
TOUCH POWER
LEVEL PAD NUMBER
OF TIMES FOR
DESIRED POWER
Power Level x 6
Power Level x 7
Power Level x 8
Power Level x 9
Power Level x 10
Power Level x 11
17
APPROXIMATE COMMON
PERCENTAGE WORDS FOR
OF POWER POWER LEVELS
40%
30% Med Low /Defrost
20%
10% Low
0%
100% High