Quick Reference Guide - Sharp FO-1470 Operation Manual

all-ux510A.book Page 139 Thursday, September 14, 2000 9:05 AM

Quick Reference Guide

Entering Your Name and
Number
FUNCTION
1. Press:
3
Display shows:
OWN NUMBER SET
START
2. Press:
3. Enter your fax number (max. of 20 digits)
by pressing the number keys.
•
To insert a space between digits, press
the # key.
•
If you make a mistake, press the SPEED
DIAL key to backspace and clear the mis-
take.
START
4. Press:
5. Enter your name by pressing the appro-
priate number keys as shown below.
•
To enter two letters in succession that
require the same key, press the
SPEAKER key after entering the first let-
ter.
SPACE =
J =
A = K =
B =
L =
C =
M =
D =
N =
E =
O =
F =
P =
G =
Q =
H =
R =
I =
S =
•
To change case, press the REDIAL key.
Press # or * to scroll through symbols
and special characters.
6. When finished, press:
Setting the Date and Time
1. Press:
Display shows:
2. Press:
3. Enter two digits for the month (01 to 12).
4. Enter two digits for the day (01 to 31).
5. Enter four digits for the year (Ex: 2000)
6. Enter two digits for the hour (01 to 12)
and two digits for the minute (00 to 59).
7. Press * for A.M. or # for P.M.
8. When finished, press:
Storing and Clearing Auto
Dial Numbers
1. Press:
Display shows:
T =
U =
2. Press 1 to store a number or 2 to clear a
V =
number.
W =
X =
3. Enter a 2-digit number (from "01" to "99")
Y =
by pressing the number keys. This will be
Z =
the Speed Dial number. (If you are clear-
ing a number, go to Step 7.)
4. Enter the full fax/telephone number.
5. Press:
6. Enter the name of the location by press-
STOP
ing number keys. (Refer to the letter entry
START
table in Entering Your Name and Num-
ber.)
7. Press:
FUNCTION
3
DATE & TIME SET
START
START
FUNCTION
3
FAX/TEL # MODE
START
STOP
START
STOP
139