Listening To The Radio - Sharp DK-A10, DK-A10BK Operation Manual

Listening to the radio (continued)
DK-A10
DK-A10BK
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 23.
2
Press the MEMORY button to enter the preset tuning
saving mode.
3
Within 30 seconds, press the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
If the "MEMORY" and preset number indicators disappear
before the station is memorized, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord becomes
disconnected.
24
Press the
desired station.
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1 Press the
2 Press the
or button to select the
1 Press and hold the CLEAR button for more than 3 seconds.
2 Within 10 seconds, press the MEMORY button.
To recall a memorized station
or button for less than 0.5 seconds to select the
To scan the preset stations
or button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
or button again when the desired
station is located.
SNOOZE/
FUNCTION CLOCK
DIMMER
VOL
SLEEP ALARM
FOLDER DISPLAY
PLAY E SOUND
MODE /DEMO
TUNING
CLEAR EQ
MEMORY
To erase entire preset memory
"TUN CLEAR" will be displayed.
"COMPLETE" will be displayed.