Adjusting The Touch Panel - Sharp SL-5500 Startup Manual

00 Cover.book Page 11 Saturday, January 19, 2002 11:33 AM
4.
Replace the battery compartment lid.
Note: Be sure to replace the battery compartment lid before you use the SL-
5500.
5.
Slide the battery replacement switch to the "NORMAL OPERATION" position.
Turning the unit on
1.
Press (On/Off) to turn the power on.
The Welcome screen appears.
Then, follow the next procedures to complete the initial settings.
Note:
• If the Welcome screen does not appear, try FULL RESET again.
Also make sure that the battery replacement switch is set to "NORMAL
OPERATION" and the battery is inserted correctly.
• If the battery level is low, the power will not turn on even if you attach the AC
adapter. Charge the battery to its full capacity.

Adjusting the touch panel

1.
On the Welcome screen, tap anywhere on the display.
The Calibration screen appears.
2.
Tap the cross hairs firmly one by one.
When you have completed adjustment of the touch panel, the Set System Time
screen appears.
Then, follow the next procedure.
11
Quick Start