Sharp SL-5500 Startup Manual page 77

00 Cover.book Page 75 Saturday, January 19, 2002 11:33 AM
75
Troubleshooting
The alert message is displayed indicating that the back-up battery is
exhausted.
The built-in rechargeable back-up battery is almost exhausted.
Connect the AC adapter to the SL-5500 for more than 30 hours or insert a fully
charged battery (EA-BL06) into the SL-5500 for more than 30 hours. The back-up
battery will be charged to its full capacity.
If the alert message still appears, contact your local SHARP dealer for repair.
Software reset can not be completed by switching the Battery
replacement switch to the "REPLACE BATTERY" position and then
back to the "NORMAL OPERATION" position.
Perform software reset with the SL-5500 turned on.
If you switch the Battery replacement switch to the "REPLACE
BATTERY" position with the unit turned on, the display screen
disappears gradually with display fluctuation.
This is not a malfunction. This unit is designed to protect the unit's data.
The CF (or SD) card icon will not disappear from the taskbar by
tapping the icon and then tapping "Eject card" (or "Eject SD-card").
The operation ("Eject card" or "Eject SD-card") is not valid if any files on a memory
card are open, or if a modem card, etc. is in use.
Pressing the Home key to display the Home screen while adjusting
settings in the Date/Time, Light & Power applications, etc. invalidates
the settings.
Save the setting and close the application first by tapping or pressing ,
then display the Home screen. Pressing the Home key does not save it.
Not sure what kind of device is to be used for the SL-5500.
For information regarding the devices, etc., visit our Web site. (See page 79,
"Product Support")