Automatic Tuning; Fine Tuning - Beko E5 Operating Instructions Manual

Enter the desired program number
by using the Ten key program
buttons
Use the
» «/» «
the program number.
Use the
»PR
STORE. Press the OK button and
STORED will appear on the
STORE line. The channel will be
stored with the program number
you desired.
You have now stored the first
channel.
Use the
»PR
again CHANNEL and continue
the tuning procedure until you
have tuned in all the programmes
you want or the television can
receive.
T o exit the SETUP menu press
the TV/TXT button.
Please note
The system will displayed automatically
on SYSTEM row i.e.BG, L, I, DK
depending the receiving broadcasting
system of the country. In some countries
the broadcasting system can be both in
BG/DK or BG/LL´.Only the TV sets
produced with Pal Secam BG/DK or Pal
Secam BG/LL´ systems can receive both
BG/DK or BG/LL´ broadcasts.
Please note
If you do not press any buttons for 15
seconds the TV will exit the menu system.
Automatic Tuning (Autoprogram)
Enter the SETUP menu as before.
SETUP
SETUP
CHANNEL C 26
SYSTEM BG
FINE TUNE 0
SEARCH
AUTOPROGRAM
CHILD LOCK OFF
PROGRAM NO P6
STORE
0 9
C/S
NEXT MENU
Use the
»PR
AUTOPROGRAM and press the
OK button.
buttons to select
button to select
«
button to select
«
button to select
«
Please Note:
a) On the TV sets equipped with ATS a
COUNTRY SELECTION menu will
appear.
Select the desired country using Program
and Volume buttons.
Press the OK button to select the country
and press the OK button again the
Automatic Tuning System regarding
the broadcasting system in the desired
country.
b) On the TV sets without ATS pressing
the OK button starts AUTOPROGRAM.
When you are sure the aerial is
connected properly press the OK
button and to confirm it press
OK button again.
T o cancel Autoprogram whilst it is
working press the Menu button.
As Autoprogram stores a channel
it will appear briefly on the screen.
Your TV is now tuned and ready to use.
Please note:
If auto sort fails to arrange the programmes
in the required sequence please refer to
programme organising. See the Program
Organising.

Fine Tuning

Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
In the SETUP menu use the
button to select FINE TUNING.
«
Use the
» «/» «
tune.
When you have finished use the
button to select
»PR «
STORE and press the OK button.
»PR
buttons to fine
11