Sleep Timer; On Timer; Avl; Language - Beko E5 Operating Instructions Manual

b) Sleep Timer
The sleep timer automatically switches
the set to stand-by after the preset time
has elapsed.
You can select the time from 15 to 120
minutes with 15 minutes steps.
There are two ways to set the sleep timer;
1- Select the SLEEP TIMER in the
FEATURES menu. Select the desired time
by using
2- You can also use the YELLOW
button on your remote control to select
this function. You can increase the switch
off time interval by pressing this button
repeatedly.
Notes:
The last 60 seconds of the desired switch
off time by counting from
When this time interval has elapsed the
set will switch to STAND-BY.
To view the remaining sleep time, press
YELLOW button. To cancel the sleep time
select OFF in SLEEP TIMER.
c)

On Timer

You can select the on time between 30
minutes to 12 hours by pressing
buttons and select the channel with
Numeric and AV buttons.
If TV is at Stand-by position, you can
switch it on at desired time and programme
by activating the ON TIMER feature.
To cancel the on time select off in ON
TIMER.
14
Left or Right buttons.
59 down.
d) AVL:
TV transmitters have different sound levels.
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
From the features menu you can select
AVL button by pressing
To supply this press
select ON for AVL.

SLEEP TIMER

SLEEP TIMER
ON TIMER ON TIMER

AVL

AVL

LANGUAGE

LANGUAGE
You can also usethe "
remote control to select this function.
Note :Only use in TV mode.
e) Language
There are many languages available for the
On Screen Displays (OSD).
» «/» «

Normalization

• Whilst watching TV you may change the
picture While restore the original picture
setting press the BLUE
remote control.
»PR
» «/» «
FEATURES
OFF OFF
OFF OFF
ON ON
EXIT
" button on your
In the features menu select
Language by Program down
button.
Press the OK button to select
the language list.
Press the
»PR
or buttons to
» «/» «
page through all the languages
and OK to select.
button.
«
button and
«/»PR «
button on the