Acs800-04 And Sine Filters; Installation, Enclosure And Cooling (Frames R2; Installation, Enclosure And Cooling (Frames R7 And R8) - ABB ACS800 User Manual

20

ACS800-04 and sine filters

Installation, enclosure and cooling (Frames R2 ... R6)
Sine filters for ACS800-04 (Frames R2 ... R6) are available in IP00 and IP23. IP00
filters must be installed in an adequate enclosure or cabinet to ensure safety. The
free space around the filter must be at least one third (1/3) of dimension A shown in
the dimension drawing on page 44. IP23 filters can be installed side by side. The
filters are cooled by natural convection; it must be made sure that there is enough
cooling air available and that the hot air can freely escape the filter enclosure or
cubicle.

Installation, enclosure and cooling (Frames R7 and R8)

Sine filters for ACS800-04 (Frames R7 and R8) are available as IP00 kits that
include the choke unit, capacitors and cooling fan. The filters must be installed in an
adequate enclosure or cabinet to ensure safety.
The following table lists the contents of the filter kits.
Filter type
NSIN0210-6
NSIN0315-6
NSIN0485-6
NSIN0900-6
NSIN1380-6
The choke module must be adequately supported, and fixed horizontally (all types)
and vertically (NSIN0210-6, NSIN0315-6, NSIN0485-6).
The capacitors of the filter need not be in the airflow. However, they should not be
installed in the hot region above the choke module. The dimensions of the capacitors
are as follows:
Sine filters with ACS800 drives
Part designation
L40
C41_43.1
Y41
L40
C41_43.1
Y41
L40
C41_43.1
Y41
L40
C41_43.1
Y41
L40
C41_43.1, C41_43.2
Y41
Quantity of
Filter type
capacitors
NSIN0210-6
3
NSIN0315-6
NSIN0485-6 3
NSIN0900-6 3
NSIN1380-6 6
Qty Name Type
1 Choke module NSUL0210-6
3 AC capacitor B25834-S0226-K*14
1 Cooling fan W2E200-HH38-06
1 Choke module NSUL0315-6
3 AC capacitor B25834-D7336-K004
1 Cooling fan W2E200-HH38-06
1 Choke module NSUL0485-6
3 AC capacitor B25834-D7606-K*14-1
1 Cooling fan W2E200-HH38-06
1 Choke module NSUL0900-6
3 AC capacitor B25834-D7826-K**4-1
1 Cooling fan D4E225-CC01-39
1 Wire set
1 Choke module NSUL1380-6
6 AC capacitor B25834-D7606-K*14-1
1 Cooling fan D4E225-CC01-39
1 Wire set
Diameter
(mm)
99
122
122
122
Technical data
150 kg
22 µF
230 V AC, 50/60 Hz, 67/79 W
150 kg
33 µF
230 V AC, 50/60 Hz, 67/79 W
160 kg
60 µF
230 V AC, 50/60 Hz, 67/79 W
370 kg
82 µF
230 V AC, 50/60 Hz, 2.8 A
For fan Y41
490 kg
60 µF
230 V AC, 50/60 Hz, 2.8 A
For fan Y41
Height of can Height including
(mm) terminals (mm)
176
176
248
176
223
223
325
223