Philips ADR610s User Manual page 5

1． Attach the bracket to the device, slide
it to bracket holder (Suction cup for
customers outside of China).
2． Peel off the protective film from
adhesive bracket (For customers
outside of China can ignore this step).
3． Place and press down the bracket
firmly onto your windshield.
4． Adjust device position to ensure it
can record video.
5． Connect Micro USB cable to USB port
of device and connect cable to
charger. Plug the charger to cigarette
lighter socket of your vehicle.
6． The machine will turn on
automatically when you start the
engine. Please set the correct time for
your device and put in your SD card
to start recording.
Remarks：
1. Please use our dedicated car charger
and cable to avoid non-compliance
with the device.
2. Suggest to disconnect the car charger
when engine is off.
3. MicroSD card hot swap will cause
system shutdown automatically,
please do not take out or insert
MicroSD card when system is
working.
4. If device in recording status without
any power input, it will automatically
shut down after 5 seconds.
4