System Setting - Philips ADR610s User Manual

4. System setting

Press menu button to enter menu list to display system settings below.
No. Function
1 Resolution
2 Video Length
3 Exposure
4 Motion Detection
5 Audio Recording
6 Information Stamp
7 G-Sensor
8 Device Sounds
9 Parking mode
10 Time & Date
11 Language
12 Frequency
13 Screen Saver
14 Fatigue Driving
15 Format SD Card
16 Default Setting
17 System Info
Description
Set resolution mode:
1080p 30fps，720p 60fps，720p 30fps.
Set video clips recording time:
1 minute, 3 minutes, 5 minutes.
Exposure setting.
Default "0" is automatic exposure，range can be set from -2~+2.
In standby mode, device will start recording automatically after
detected a moving object ahead within the effective range, if
video pictures no change, it will stop recording. If the front object
move again, device will start recording again.
Switch on/off voice recording, default is On.
Switch on/off information stamp.
Set G-Sensor value.
Switch on/off button beep sound.
When device is OFF, if collision happened, it will trigger G-sensor
to start device and start up 20 seconds emergency recording
functions. If no power supplied, device will automatically shut
down after 20 seconds emergency recording. If device has power
supplied, device will enter into normal recording status after 20
seconds emergency recording.
Set system date and time.
Language setting, default is Simplified Chinese for China
customers and English for customers outside of China.
Set different scenario related frequent of luminaire, default value
is 50.
Set screen saver time, can be set as always on or set screen saver
time, default setting is 5 minutes to enter screen saver mode.
Switch on/off fatigue driving alert function.
Format MicroSD card.
Reset all device settings to factory default settings.
Display firmware version information.
7