ABB SR100B Quick Reference Manual

SR100B – Quick Reference Guide
Welcome to the SR100B
This quick reference guide contains loading procedures for roll
and fanfold charts, an overview of display/key functions and a
basic index for the SR100B User Guide.
Full installation, operating and programming procedures
together with a comprehensive index are provided in the User
Guide.
Accessories 1 Configuration
Alarms Alarms 22
Analog Inputs 16
Acknowledging 13, 23
Chart 24
Configuring 22
Relay Outputs 29
Hysteresis 22
Message Printing 25 Connections 34 to 37
Operator Page Messages 12
Date/time 11
Process 13, 22
Dimensions 31
Source 22
Easy View 26
Status 13
Electrical Connections 34
Trip Level 22
Error Messages 12
Type 22
Fault-finding 38
Analog Inputs
Inputs
Channel Tag 9, 11, 18
– see Analog Inputs
Conditioning 19
Language Selection 30
Configuration 16 to 19
Links 37
Connections 34, 35
Mounting 32
Copying 19
Operator Messages 12
Fault Detection 18
Operating Page 10, 11
Isolation 35
Paper Length 11, 26
Linearizer Type 17
Passwords 14, 15
Links 37
Pen
Offset Adjustment 21
Fitting 8
Range 17, 18
Scaling 20 Lift 26
Span Adjustment 21 Print Speed 25
Type 17, 37
Real-time Clock 30
Chart
Relay Outputs
Configuration 24
Connections 36, 37
Easy View 12, 26
Security Access
Length 11, 26
– see Passwords
Loading 4 to 7
Siting 31
Printout 9
Software Version 14
Rewind 4
Spares 39
Set Length 26
Start-up Displays 10
Speed 4, 6, 9, 11, 24, 25
Text Printing 25
Time Line 4, 6, 26
Thermocouple 17
Type Select 25
Time Line Advance 4, 6, 26
LOADING A NEW ROLL CHART
1
OPERATING PAGES
(Channel displays, date/time)
Press until the SECURITY ACCESS page is displayed.
1
Enter the access code for the LOAD CHART page (the default is 0).
2
Select the LOAD CHART page.
3
Press to select the START RELOAD frame.
4
Press to rewind the chart.
5
Caution.
The chart rewinds at high speed. DO NOT stop the chart until automatic rewind
is complete.
If the chart is fully rewound
6
If the motor stops before the chart is fully rewound, press and hold
has rewound onto the removeable spool.
9
Remove old chart
10 Withdraw spindle
Insert spindle
11
into new chart
12
Fit new chart
2
SECURITY ACCESS
ENTER CODE 0
before the motor stops, press
until the remaining chart
7 Lift catch
8 Withdraw cassette
Unwind enough chart to fit over the
13
front and rear sprocket wheels
Feed chart under
14
retaining bar
Tension chart with
15
Refit cassette thumbwheels
16
to instrument
3
LOAD CHART
PAGE
4
TO START RELOAD
PRESS ENTER
5
REWINDING XXX%
(STOP ) (PAUSE )
REWOUND (MORE )
the key.
LOAD NEW ABB CHART
or
Caution. Once
chart loading
complete, ensure the
correct chart type is
set in the
Chart Control
Configuration Page
see Section 3.4.1 in
the User Guide.
17
18
OPERATING PAGES
(Channel displays, date/time)
Press to
17
resume recording.
Press until the
18
operating page is
re-displayed.
6
is
–