Changing The Greeting; Changing The Backlight Time Length - Sanyo SCP-7200 Operating Manual

Changing the Greeting

The greeting can be up to 15 characters and is displayed on the first line of your phone's
display screen in Standby mode.
To change your greeting:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Greeting, and press Menu/OK.
5. Select either Username or Custom .
Username to display the username when Username portion of the User Address is
l
signed in.
Custom to customize the greeting by entering characters (Press BACK to erase
l
single character, press and hold BACK to erase entire entry. See pages 41-44 for
the entering method.)
6. Press Menu/OK.
Note: When Calendar or Screen Saver is set for StandbyDisplay, greeting is not
displayed.

Changing the Backlight Time Length

The backlight setting lets you select how long the display screen and keypad are backlit
after any key press is made.
To change the backlight setting:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight Settings, and press Menu/OK.
3. Highlight Display, and press Menu/OK.
4. Highlight Backlight, and press Menu/OK.
5. Select the menu under LCD, and press Menu/OK.
6. Select Always On, Always Off or your defined time length, and press Menu/OK.
Always O ff always turns the Backlight off.
l
Always On always turns the Backlight on.
l
Note: Always On settings set to as LCD returns to previous value on next power cycle.
To change Keypad backlight setting:
1. From the step 5 above, select the menu under Key and press Menu/OK.
2. Select Always Off or your defined time length, and press Menu/OK.
Note: Long backlight settings affect the battery's talk and standby times.
23