Charging The Batteries - Siemens Hicom 300E Operating Instructions Manual

Convenience mobile unit for hicom 300e
Hide thumbs Also See for Hicom 300E:
Table of Contents

Advertisement

Batteries supplied are not charged.
Note:
New batteries should be initially charged for a minimum period of 16
hours without interruption – irrespective of any messages on the
display.
In order to maintain max. battery storage capacity for as long as
possible, the mobile unit should only ever be inserted in the charging
shell when the batteries are empty.
The batteries warm up during charging.
Only the following spare batteries are permitted:
Panasonic P-60 AA, Philips R6 NC-P, Saft RC6, UCAR RC6, DAIMON
ACCU 1000, Varta 751RS, Sanyo N-3UN and N-3UC.
Insert the mobile unit in the Gigaset 2000L charging shell to charge the
batteries. The mobile unit can be inserted with the display facing
upwards or downwards.
The left LED
are charging.
Charging times:
– Batteries in the mobile unit: 4 - 5 hours
– Replacement batteries in the reserve compartment of the
charging shell: 20 - 24 hours
Battery life:
These times are only achieved after several charging and discharging
cycles.
– between 70 and 130 hours in stand-by mode
– between 7 and 13 hours when phone is in use.
Display at 100%
Display at 33%
14
Putting into service
on the charging shell lights up while the batteries
Display at 66%
Display when batteries are
almost flat

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hicom 2000cGigaset 2000c

Table of Contents