Getting Started - Siemens M65 User Manual

Getting started

The phone must be assembled
before you can get started.
SIM card and battery
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then slide the SIM
into the holder
• Insert the battery sideways into
2
the phone
3
wards until it clicks into place.
1
).
, then press it down-
Getting started
Battery cover
• Pull the rubber gasket over the
locating lugs
push it onto the four studs
that it is firmly positioned on the
cover.
• Push cover forwards
locating lugs engage in the open-
ings in the phone.
Additional information
Your phone's display is supplied with a
protective film. Remove this film slowly
before assembling the phone. In rare
cases, static discharge may cause dis-
colouration at the edges of the display.
However this will disappear within approx.
10 minutes.
1
on the cover, then
2
3
until the
9
so