Minute Beep - Siemens M65 User Manual

82 Setup
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
This can take up to 30 seconds (may
be set to 5 second intervals).
Busy
Divert occurs if a call is in progress. If
is activated (p. 25) you
Call waiting
will hear the call waiting tone during
a call (p. 27).
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the SIM
card is changed).
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored phone
number is displayed. Confirm number.
b
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key (except for

Minute beep

During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The person you are
talking to does not hear this beep.
b
b
b
).
B