Preparing for Operation
Step by Step
01=DHCP IP assign?
>
off?
>
02=Terminal IP addr.?
Change?
>
03=Terminal mask?
Change?
>
00=End?
Only if no DHCP server:
:
Confirm.
>
:
Confirm to switch the DHCP IP assign off.
>
The change is displayed.
:
Choose and confirm.
>
:
Confirm.
>
o
Enter IP address of the optiPoint 410/420
(to edit see
:
Confirm. The IP address is displayed.
:
Choose and confirm.
>
:
Confirm.
>
o
Enter terminal mask of the optiPoint 410/420
(to edit see
:
Confirm. The terminal mask is displayed.
:
Choose and confirm to go to the top level of the config-
>
uration menu.
In all configuration types
Enter Gateway address for communication with the
HiPath System via the gateway. Entering only possible
via Web-based Management, see
Menu System > Gateway settings, see
Enter Registration subscriber number (extension
number). The extension number must be stored in the
HiPath system. Entering only possible via Web-based
Management, see
Menu System > Gateway settings, see
Troubleshooting
If the optiPoint 410 economy/economy plus/standard/
advance and optiPoint 420 advance does not function
after making the described configuration, the failure can
be attributed to peculiarities of the network environ-
ment.
More information on error detection is available in the
"Start up not successful"
Setting Up the Telephone
page 93).
page 94).
page 42.
page 91.
page 42.
page 55.
page 55.
15