Siemens 2000 Administration Manual page 60

Alphabetical Reference
Clear Screenlock Password
•
•
Clear User Data
•
•
Codec
•
•
Codec Independent Threshold Values
•
•
60
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
Herewith the user password will be reset.
page 46
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
With this function you can delete all the entries made by the user in the
optiPoint 410/420.
page 46
Here you can select the audio transfer principle that should be used.
Codec Audio Mode
High Uncompressed audio
quality transmission
preferred
Low Use preferred com-
bandwidth pressed audio transmis-
preferred sion.
Low Use compressed audio
bandwidth transmission exclusively.
only
Standard value page 96.
page 49
Max jitter threshold (in ms): The jitter will be compared with this thresh-
old. The jitter will be measured between two consecutive RTP packag-
es.
– Valid values: 1 ... 255.
– Standard value
Avg round trip delay threshold (in ms): Round Trip Delay is the summary
of the delays in both directions.
– Valid values: 1 ... 65535.
– Standard value
page 54
Use of
Uncompressed audio transmis-
sion use (
broadband Internet connec-
tions.
Suitable for connections with
different bandwidths.
Suitable for connections with
low bandwidth.
page 96.
page 96.
Description of functions
G.711). Suitable for