7.4.3
Motion detection settings
Siemens Building Technologies
Fire Safety & Security Products
These settings are similar to the alarm input settings, with some additional
functions:
Motion detection
Set to ON: open motion detection function.
–
Default is off, close motion detection function.
–
Area
Click on "Set motion area", and an image screen will pop up.
–
Select the interested area by dragging the mouse.
–
Sensitivity
Set "Sensitivity."
High: An alarm will be triggered with even small changes in brightness within
–
the defined area.
Mid: Intermediate between High and Low.
–
Low: An alarm will be triggered with a major change in brightness within the
–
defined area.
Text Enable
Select ON or OFF to define whether an additional alarm text defined in the
–
Text field is to be overlaid on the video image.
Text
Define an individual text for alarm overlay.
–
Audio Output
Select ON or OFF to define whether an additional audio message (*.wav),
–
pre-recorded on the SD card, is to be output via the Audio out connector.
Event
Pre-recorded voice files with extension .wav that have been uploaded to SD
memory card in advance can be selected as voice alarm message. Max. 4 kinds
of audio source can be selected.
Configuration
35
01.2009