Alarm Output; Audio Event - Siemens CCMX1315-LP Configuration Manual

Configuration
7.4.4

Alarm output

7.4.5

Audio Event

36
Siemens Building Technologies
Fire Safety & Security Products
Alarm mode:
The alarm output can be turned OFF or be activated when any of the following
events occurs:
B/W: when the camera changes to monochrome
–
Event: Once alarm input1 or alarm input 2 or motion is triggered, the alarm out
–
will be triggered immediately as well.
Output hold time:
Set a time to hold alarm output. Choose either 0, 5, 10, 15, or 30 seconds. This
function is used when connecting to alarm output terminals and activating a
siren, buzzer or emergency light.
You can choose which audio *.wav file you want to upload as a voice alarm
message to the SD card from your PC. There are 4 audio events available for
upload. You can select in the appropriate menu which audio event is to be played
with which event (Motion or Alarm input 1).
01.2009