Putting The Mobile Telephone Into Service; Removing The Protective Cover; Inserting The Battery - Siemens HiPath 4000 Operating Instructions Manual

Opening the
battery
compartment
Inserting the
battery
Closing the
battery
compartment
10

Putting the mobile telephone into service

Removing the protective cover

Remove the protective cover from the display be-
fore putting the mobile telephone into service.

Inserting the battery

Note:
The battery supplied is not charged. It gets charged once it is
in the mobile telephone.
Note:
• Please observe the safety notes on the back cover and
page II.
• Only use permitted battery, see page 12.
• Open the battery compartment in a dust-free environment
only.
• Your telephone directory entries and all settings remain
stored even if you remove the battery. The date and time
settings, however, are lost. See page 47.
Unscrew the battery compartment lid with a coin, for example (1), and
remove it (2).
Insert the permitted battery (3).
1
Replace the lid (4), slide it back over the battery compartment (5) and
screw it on tightly (6).
2
3
6
5
4