Putting The Handset Into Service; Removing The Protective Cover; Inserting The Batteries - Siemens 3000 Operating Instructions Manual

Putting the handset into service

Removing the protective cover

Remove the protective cover from the display before
putting the handset into service.

Inserting the batteries

One battery is provided with the Gigaset 4000 Micro, while two are pro-
vided with the Gigaset 4000 Comfort. The batteries are supplied un-
charged. They are charged in the handset.
Note:
• Please observe the safety notes on the back cover.
• Only use approved batteries (
• Open the battery compartment in a dust-free environment only.
• Your telephone directory entries and all settings remain stored
even if you remove the batteries. The date and time settings
will be reset.
Opening the battery compartment
Unscrew the battery compartment lid with a coin, for example (1), and re-
move it (2).
Inserting the battery
Insert the permitted battery (3).
1
Closing the battery compartment
Replace the lid (4), slide it back over the battery compartment (5) and
screw it on tightly (6).
2
3
Putting the handset into service
page 15).
6
5
4
13