Walkie-Talkie Mode - Siemens 3000 Operating Instructions Manual

Additional functions
Step-by-Step
D E
Room Monitor
F
o
if necessary W Enter the required phone no. and correct individual char-
D E
Save
78
[
Select and confirm the menu item.
G
On Fix the setting.
D
Move the cursor down one line.
Open the input field for phone numbers.
Change
acters as necessary using the "Delete" Display key.
©
Open the menu.
[
Select and confirm the menu item.
D
Move the cursor down one line.
F G
Set the sensitivity level.
Save the settings. If the room monitor function is acti-
Save
vated.
The "Off" key is used to deactivate the room monitor
function.

Walkie-talkie mode

This function allows you to operate handsets outside
the radio network.
Handsets cannot be used for calls in walkie-talkie
mode. The range between the handsets involved is
max. 300 m. The handset operating time is significantly
reduced in this mode.
One of the following prerequisites must be met in order
to operate handsets in walkie-talkie mode:
• The handsets used must be registered at the same
base and have selected this base.
or:
• The handsets used must have set "Best Base".
or:
• The handsets used are not registered.
If one of these prerequisites is met, then all handsets
that are within the handset's range and that have acti-
vated walkie-talkie mode are called.