Sending A Signal To The Network - Siemens 3000 Operating Instructions Manual

Step-by-Step
> <
Service?
> <
* 90=Control Relay
On?
> <
Service?
> <
#90=Control Relay
Off?
> <
Service?
> <
* 51=Recall to Net-
work?
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Follow the user guidance system from this point on-
wards. Enter the required switch code (1... 4).
a
Press the On-hook key to end the process.
Deactivating a control relay
c
Press the Talk key.
Menu Call the system menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Follow the user guidance system from this point on-
wards. Enter the required switch code (1... 4).
a
Press the On-hook key to end the process.

Sending a signal to the network

To enable ISDN-type services/ features to be started via
analog lines (e.g. call waiting when a line is busy, three-
way conference calls, etc.), you must send a signal to
the network before dialling the service code and/or
phone number.
This function can also be called directly by entering the
code ( page 84).
p
You have an external connection.
Call the system menu.
Menu
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Enter the service code and/or the phone number.
Conducting calls – enhanced functions
41