Sending A Signal To The Network; External Call Forwarding With A Multiple Subscriber Number - Siemens HiPath 3000 User Manual

Making calls – enhanced functions
Step by Step
> <
Service?
> <
* 51=Recall to Net-
work?
> <
Service?
> <
Trunk FWD on?
78

Sending a signal to the network

To enable ISDN-type services/ features to be started via
analog lines (forexample, call waiting when a line is
busy, three-way conference calls, etc.), you must send
a signal to the network before dialing the service code
and/or phone number.
This function can also be called by entering the code
Page 132
p
You have an external connection.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the service code and/or the phone number.
External call forwarding with a
multiple subscriber number
If your communication system is connected to an ISDN
multiple device line, then you can forward all incoming
calls from the public network through your multiple sub-
scriber number (MSN) to an external destination.
There are three types of forwarding:
• Calls are forwarded immediately (1=immediate call
forwarding).
• Calls are forwarded after a certain time (2=unan-
swered calls).
• Calls are only forwarded when the line is busy
(3=when busy).
Activating call forwarding to a "trunk"
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o [
Enter and confirm your own multiple subscriber num-
ber.
Page 132.