Data Communication With The Pc - Siemens HiPath 3000 User Manual

Additional functions
Step by Step
124

Data communication with the PC

So that your handset can communicate with your PC,
you must install the "Gigaset QuickSync" application on
your PC (download for free at www.gigaset.com/
gigasets790).
Once you have installed "Gigaset Quick-Sync" you can
connect the handset to your PC via Bluetooth
Page 125 or a USB data cable
If you want to use the Bluetooth connection on your PC,
your PC must have a corresponding dongle.
transferring data
Launch the "Gigaset QuickSync" application. Now you
can:
• Synchronize your handset's address book with Out-
look,
• Transfer CLIP images (BMP , JPG, GIF) from the com-
puter to the handset,
• Transfer images (BMP , JPG, GIF) as a screensaver
from the computer to the handset.
• Transfer sounds (ringtone melodies) from the PC to
the handset.
Data transfer is shown on the display during data trans-
fer between the handset and PC. No inputs are possible
via the keyboard when this operation is active and in-
coming calls are ignored.
Note:
If the USB data cable is connected, is not possi-
ble to establish a Bluetooth connection. If a USB
data cable is connected during an established
Bluetooth connection, the Bluetooth connection
is interrupted.
Page 18.