Preventing And Allowing Call Waiting (Automatic Camp-On); Turning The Call Waiting Tone On And Off - Siemens HiPath 5000 RSM Operating Instructions Manual

Making and Answering Calls
Step by Step
(
or
or
10 10 10 10
Placing the first call on hold and answering the sec-
ond call:
) Enter the code.
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
( ) Press the key.
Enter the code or wait two seconds.
or (depending on the configuration)
( ) Press the key twice.
Preventing and Allowing Call Waiting
(Automatic Camp-On)
If this function has been configured (ask the service per-
sonnel), you prevent or allow a second call Æ page 9
from being signaled by automatic camp-on during an
ongoing call.
Lift the handset.
Enter the code to "prevent" or "allow" call waiting.

Turning the Call Waiting Tone On and Off

You can suppress the call waiting tone (approx. every six
seconds) for external calls. A one-time special dial tone
then alerts you to the waiting call.
Lift the handset.
Enter code for "tone off" or "tone on".