Handling and operation
Connecting an external speaker
If required you can connect an additional external speaker (with a 3.5 mm
jackplug) to the speaker connections
Connecting the headphones
If required you can connect headphones (with a 3.5 mm jackplug) to the
headphone connection
then switch off automatically.
Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
Switching On and Off
Press the POWER/AL.OFF button
The POWER/ST. LED
Press the POWER/AL.OFF button
The POWER/ST. LED
day and a programmed alarm time.
Setting the time
In order to set the time of day the device must be switched off .
Press the TIME SET button
Press the SKIP+/HOUR button
Press the SKIP-/MIN button
Press the TIME SET button or wait for approx. 10 seconds to confi rm the
time input. The time indicator stops blinking.
NOTICE
►
The time of day will reset to 0:00 if the device is disconnected from
the power source and no batteries have been inserted.
KH 2420
24
on the rear panel of the device.
on the rear panel of the device. The speakers
23
to switch the device on.
7
lights up green and the display
to switch the device off .
7
goes out and in the display
. The time indicator in the display
4
to set the hours.
14
to set the minutes.
13
5
is activated.
5
is shown the time of
blinks.
5
11
GB
IE
CY