Waken With Radio - Silvercrest KH 2420 Operating Instructions Manual

Handling and operation
Waken with the alarm tone
Press the PROG button
shown in the display
Press the AL1.SET button
10 seconds. In the display
the indicator "AL 1/AL 2" with the symbol
grammed.
Waken with music
Press the PROG button
A musical note symbol is shown in the display
Press the AL1.SET button
10 seconds. In the display
the indicator "AL 1/AL 2" with the symbol

Waken with radio

If you want to be woken by the radio, before programming the wake time carry
out the following settings:
Slide the AUX/RADIO/CD switch
With the TUNING controller
awoken with.
With the VOLUME controller
Waken with a CD
If you want to be woken by a CD, before programming the wake time carry out
the following settings:
Slide the AUX/RADIO/CD switch
Insert the desired CD into the CD compartment.
With the VOLUME controller
NOTICE
► If you want to check the programmed wake time briefl y press on the AL1.
SET button
Wait 10 seconds or press the buttons again to return to the time of day
indicator.
KH 2420
3 once to select "Alarm tone". A bell symbol is
5 .
6 /AL2.SET button
5 appears the time indicator and in brackets
3 twice to select "Music".
6 /AL2.SET button
5 appears the time indicator and in brackets
19
22 select the station that you would like to be
set the sound level.
18
19
set the sound level.
18
6 /AL2.SET button 8 . The programmed wake time blinks.
8 again or wait for approx.
. The wake time is pro-
.
5
8 again or wait for approx.
♪
. The wake time is programmed.
to "RADIO".
to "CD".
GB
IE
CY
13