Setting Up And Connecting; Safety Instructions; Items Supplied And Transport Inspection; Unpacking - Silvercrest KH 2131 Operating Instructions Manual

Setting up and connecting

GB
IE

Safety instructions

Items supplied and transport inspection

Unpacking

6
WARNING
Damage may occur to people and property when operating
the device!
Observe the following safety information to avoid any risks:
► Packaging material may not be used as a play thing.
There is a risk of suff ocation!
► To avoid risks to persons and property, pay heed to the requirements for
the installation site and for the electrical connection.
The device is delivered with the following components as standard:
▯ 1 Radio Transmission Set (1 x transmitter, 1 x receiver)
▯ 2 Power adapters
▯ 1 Scart to Cinch Adapter IN (Receiver)
▯ 1 Scart to Cinch Adapter OUT (Transmitter)
▯ 1 Cinch to Cinch cable, (3 core)
▯ 2 Cinchplug to Jackplug Cables, (3.5 mm Stereo-Jackplug)
▯ Infrared transmission diode cable (3 diodes)
▯ 3 Adhesive pads for the infrared transmitter diodes
▯ Audio Adapter (3.5 mm stereo jackplug on cinch sockets)
▯ Operating instructions
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the items supplied are incomplete, or damaged due to defective packaging
or transportation, contact the Service Hotline (see chapter Service).
Remove all parts of the device and the operating instructions from the box.
Remove all packing material.
Setting up and connecting
KH 2131