Table of Contents
Advertisement
Parameters/address space
4.3 Address space
Value status (Quality Information, QI)
The meaning of the value status depends on the submodule on which it occurs.
For the first submodule (=basic submodule), the value status 0 indicates that the value is
incorrect or that the IO controller of the basic submodule is in STOP state.
For 2nd to 4th submodule (=MSO submodule), the value status 0 indicates that the value is
incorrect or one of the following errors has occurred:
● The basic submodule is not yet configured (not ready).
● The connection between the IO controller and the basic submodule has been interrupted.
● The IO controller of the basic submodule is in STOP or POWER OFF state.
The following figure shows the assignment of the address space for submodules 1 and 2 and
the value status.
Figure 4-3
18
Address space for configuration as 1 x 16-channel DQ 16x24...48VUC/125VDC/0.5A ST
S MSO with value status
Digital output module DQ 16x24...48VUC/125VDC/0.5A ST (6ES7522-5EH00-0AB0)
Manual, 11/2015, A5E35683139-AA
Advertisement
Table of Contents
