Technical Specifications - Siemens ET 200MP Manual

Technical specifications

Technical specifications of the DQ 16x24...125VUC/0.5A ST
General information
Product type designation
Hardware functional status
Firmware version
Product function
I&M data
Engineering with
STEP 7 TIA Portal can be configured/integrated
as of version
STEP 7 can be configured/integrated as of version V5.5 SP3 / -
PROFIBUS as of GSD version/GSD revision
PROFINET as of GSD version/GSD revision
Operating mode
DQ
MSO
Output voltage
Rated value (DC)
Rated value (AC)
Power
Power consumption from the backplane bus
Power loss
Power loss, typ.
Digital outputs
Number of outputs
Sinking output
Switching to P potential
Short-circuit protection
Limitation of inductive shutdown voltage to
Control of a digital input
Switching capacity of outputs
With resistive load, max.
With lamp load, max.
Output voltage
for signal "1", min.
Digital output module DQ 16x24...48VUC/125VDC/0.5A ST (6ES7522-5EH00-0AB0)
Manual, 11/2015, A5E35683139-AA
6ES7522-5EH00-0AB0
DQ 16x24 ... 48VUC/125VDC/0.5A ST
FS01
V1.0.0
Yes; I&M0 to I&M3
V13 SP1 / -
V1.0 / V5.1
V2.3 / -
Yes
Yes
24 V; 48 V, 125 V
24 V; 48 V (50 - 60 Hz)
2.0 W
3.8 W
16
Yes
Yes
No
200 V (suppressor diode)
Yes
0.5 A
40 W; at 125 VDC, 10 W at 48 VUC, 5 W at 24
VUC
L+ (-1.0 V)
6
23