ELEC
IGNITION SYSTEM
IGNITION SYSTEM
Peak voltage
When checking the peak voltage do not
touch any of the connections of the digital
tester lead wires.
NOTE:
If there is no spark or the spark is weak, con-
tinue with the ignition system test.
If a good spark is obtained, the problem is
not with the ignition system, but possibly
with the spark plug(s) or another compo-
nent.
1. Measure:
CDI unit output peak voltage
Above specification
tion coil.
Below specification
charge coil output peak voltage.
CDI unit output peak voltage
Orange (O) – Brack (B)
Circuit
r/min
Cranking
V
–
2. Measure:
Charge coil output peak voltage
Above specification
er coil output peak voltage.
Below specification
coil.
Charge coil output peak voltage
Brown / White
(Br/W) – Black (B)
Circuit
r/min
Cranking
V
120
42
Replace the igni-
Measure the
Loaded
1,500
3,500
105
175
135
Measure the puls-
Replace the charge
Loaded
1,500
3,500
115
205
150