Epson WF-M5299 Start Here

WF-M5299
Start Here
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User's Guide.
Note: This printer is designed for use with Epson
not third-party ink. For important ink information, visit
www.latin.epson.com/tintaepson or see your printer box.
1
Unpack
Warning: The product is heavy and should be lifted and moved by
two people.
1
Remove all protective materials from the product.
2
Raise the printer cover and remove all protective materials
from inside the product, then close the printer cover.
3
Insert the output tray, then set it down gently.
ink packs only,
®
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2
Turn on the product.
3
Select your language and time on the LCD screen.
Note: You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink supply unit
(ink pack)
Note: The included initial ink pack is designed for reliable printer setup
and cannot be used as a replacement pack or resold. After setup, the
remaining ink is available for printing.
Caution: Keep ink packs out of the reach of children and do not drink
the ink.
1
Unlock and open the ink pack tray cover, then remove the
packing material.
2
Press the ink pack tray to release it, then pull the tray out.