Sony PCM-D10 Operating Instructions Manual page 54

Listening to wireless sound (continued)
3 Follow the on-screen instructions until a
Bluetooth is established.
Hint
• To disconnect the Bluetooth connection, put the
linear PCM recorder onto the device once again.
• If Bluetooth connection is not established, keep
your linear PCM recorder touched on the
on the Bluetooth audio device and slowly move
the recorder back and forth and around. See page
81 as well.
• Check if the NFC function of your linear PCM
recorder is turned on. Select " Bluetooth"  "NFC
Settings" from the HOME menu and make sure that
"ON" is selected.
Note
• When a camera tripod (commercially available) is
attached to the hole for attaching the tripod on
the back of the linear PCM recorder, the
on the recorder is hidden by the tripod and it is
hard to establish a connection with the one-touch
operation. When you intend to use the tripod, be
sure to establish the connection before attaching it.
• While a recording process is in progress (recording
is in progress or paused or the linear PCM recorder
is paused for recording), you cannot establish a
connection with the one-touch operation. Before
establishing the connection, make sure that
recording is on standby.
54
mark
mark