Product Configurations
Interfaces
Wi-Fi model (IEEE802.11 + USB)
Bluetooth model (Bluetooth + USB)
Wireless or USB is available. When you connect to the host with a USB cable and the printer is turned
on, the USB interface is selected.
NFC Tag
You can perform wireless setup for terminals that support NFC by placing the terminal close to the NFC tag
(mark) on the printer.
There is no Read/Write function.
Accessories
Included
Thermal roll paper (for operation check)
Battery (OT-BY20)
Single charger (OT-SC20)
AC adapter (AC adapter, C)
AC cable
*1
Belt clip (attached to the printer)
USB cable (1.2m {4 feet} long)
Setup Guide (Wi-Fi / Bluetooth)
CD-ROM
Warranty certificate
1 May vary depending on the model or region.
2 May not be included, depending on the model.
16
*2
NFC Tag