- Press "SET" button of the ACP.
Select [Function] menu, and press "SET" button.
Select [S/W update] menu, and press "SET" button again.
To run the software update, press "SET" button again.
Wait while software is running.
After completing the update, press "SET" button to restart the ACP.
Even when you do not immediately restart, update will be applied only after rebooting the ACP
in the future.
PQCPC22A0
CAUTION
!
• While software update is in progress and while "Please wait..." is displayed, turning off
the power of the ACP or removing USB memory may cause severe disorder of the ACP.
Click SET
button
Click SET
button
Click SET
button
Wait for
10~20 sec.
Installing ACP
101