Dell ChengMing 3980 Setup And Specifications page 21

Option
USB Wake Support
Block Sleep
Table 25. POST Behavior
Option
Numlock LED
Keyboard Errors
Fast Boot
Extended BIOS Post Time
Full Screen Logo
Warnings and Errors
Table 26. Virtualization Support
Option
Virtualization
VT for Direct I/O
Table 27. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Description
• Enabled in S4 and S5
This option is Disabled by default.
Allows you to enable the USB devices to wake the computer from standby mode. This option is
enabled by default.
Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
• Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
• 0 seconds (default)
• 5 seconds
• 10 seconds
The option is disabled by default
• Prompt on Warnings and Errors (default)
• Continue on Warnings and Errors
• Continue on Warnings
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel® Virtualization Technology. Enable Intel Virtualization Technology -
This option is enabled by default.
This option is enabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is not set by
default.
The option is enabled by default
Allows you to control flashing of the system firmware to the previous versions. This option is enabled
by default.
System setup 21