Table of Contents
Advertisement
Changing Settings Using a Web Browser
Changing Setup
Use the following procedure.
1
In the GUI, click "MPEG" under "Setup.".
The MPEG Setup screen appears.
2
In the MPEG Setup screen, click "setup."
Submenu items of "setup" appear.
3
Click on the submenu item to be set (for example
"C001:ref_source").
A setting selection/input window appears at the
right of the screen.
4
Enter the setting value, or turn on the radio button
for the value you want to select, then click the SET
button.
This changes the setting, and "**" appears.
If the setting value is out of range
An error message appears in the setting indication
space. Reenter the setting.
For details of error messages, see page 86.
To cancel the setting change
Click the CANCEL button.
To select "auto" in "C013:video_rate" and
"C061:ts_rate"
In the field to enter the setting value, enter "auto."
32
Advertisement
Table of Contents
