Electronic Pen Operation - Panasonic UB-T880 Manual

Electronic Pen Operation

The electronic pen can be used to draw and erase any previously drawn object on the desktop.
Notice
• To avoid operating errors, do not touch the penpoint when the electronic pen is not in use.
Note
• You can use more than 1 pen, but not at the same time.
• As the drawing amount increases, the drawing and other operation speed may become slower.
• When both the electronic pen and a finger are used simultaneously, the elite Panaboard will not
recognize them as separately operations, but will treat both as if the same operation was occurring.
If operating with a finger, wait 1 second or more before using the electronic pen.
The following operations can be performed with the electronic pen:
• Use the Selector Dial to select a function for the electronic pen.
Black / Red / Blue / Green
Eraser
Yellow / Yellowish Green / Pink
Mouse
Low-Power Mode
• Performs the same function as pressing the Page Up key on a computer, remotely.
• Performs the same function as pressing the Page Down key on a computer, remotely.
• Touch the screen board with the pen while holding this button to display the Drawing Menu.
(The Drawing Menu will not display while the Selector Dial is set to Mouse.)
Note
• The navigation buttons will work as long as the electronic pen is within the approximate range of 10m
(30 ft.) of the elite Panaboard (without obstructions).
Draws with a marker in the selected color.
Marker line thickness and other settings can be specified in the
Drawing Menu.
Erases marker lines that have been drawn.
Highlights with a highlighter in the selected color.
Highlighter line thickness and other settings can be specified in
the Drawing Menu.
Operates in the same way as using a persons finger.
Note
• This function can not be used with the electronic pen which
has two "Eraser"
Puts the electronic pen in low-power mode.
The pen detects motion to turn itself on or off automatically. If not
using the electronic pen for periods of time, set it to low-power
mode to prevent battery consumption.
― 22 ―
in the Selector Dial.