5.4 How to replace the Sensor Housing
The Sensor Housing contains the ribbon cable that allows the Electronic Housing to gather
data from the probe.
Turn OFF transmitter power. Unscrew the end cap of the Display Module. On the
1.
Display Module, remove the two setscrews. Depress the two tabs on the Display
Module and remove it.
Page 132
Figure 5-3: Sensor Housing
WARNING:
The Sensor Housing is attached to the Electronic Housing using a
threaded connection. The Sensor Housing contains a ribbon cable it is
crucial to ensure this ribbon cable is not damaged in the process.
The ribbon must be manually guided when removing the Sensor Housing
from the transmitter.
Refer to
Figure 5-2:
Electronic Housing Components
for more information.
SLG 700 SmartLine Level Transmitter User's Manual
Revision 8