1.5 Front Panel Description
20 PCIE-5565PIORC Reflective Memory Board
The PCIE‐5565PIORC has an optical transceiver and three LEDs located on the
front panel illustrated in the figure below. Table 1‐3 on page 21 outlines the front
panel's LEDs. The port labeled "RX" is the receiver and the port labeled "TX" is
the transmitter. The PCIE‐5565PIORC uses "LC" type fiber‐optic cables.
Figure 1-3 Low Profile and Standard Front Panels of the PCIE-5565PIORC
Standard Front Panel
CAUTION
When fiber-optic cables are not connected, the supplied dust caps need to be
installed to keep dust and dirt out of the optics. Do not power up the
PCIE-5565PIORC without the fiber-optic cables installed. This could cause eye
injuries.
Low Profile Front Panel
TX TRANSMITTER
CONNECTION
RX RECEIVER
CONNECTION
STATUS
(RED)
SIGNAL DETECT
(YELLOW)
OWN DATA
(GREEN)