Motorola GP68 Operation Manual page 13

Edit the Channel Scan List
1. Rotate the selector switch to select the St menu item.
2. Use (Left Arrow) or
to 20).
A flashing channel number indicates that the channel is excluded from the scan list.
A channel number that lights continuously indicates the channel is included in the
scan list For example, a display showing 18 with flashing digits indicates that
channel 18 is excluded from the scan list
3. Press the Toggle Light/Enter Button to toggle the state of a channel in the scan
list from included to excluded, or from excluded to included.
4.To exit the scan list edit mode, select another menu item by turning the selector
switch.
Deleted a Programmed Channel
1. Rotate the selector switch to select the "ErAChn" menu item.
2. Use (Left Arrow) or (Right Arrow) to scroll through the channels (01 to 20).
3. Press the Toggle Light/Enter Button, the selected channel should flash.
Edit Phone Access/Deaccess Codes
1. Rotate the selector switch to select the appropriate menu item.
2. Press any key (except the Toggle Light/Enter Button) to enter the edit mode The
LCD displays the currently programmed access/deaccess code. For a code, which
exceeds the 6-digit display length, the rightmost digit flashes to indicate more digits
exist on the right. You can now change or enter digits as required, up to a maximum
of 8, using any of the numeric keys, as well as the *, #, A, B, C, and D keys. The
flashing cursor indicates the position of the next digit to be entered.
3. To change the access/deaccess code, Use
Arrow) to scroll through the existing code's digits and
digits then enter the new digits. The display shows the new digits as they are being
entered. When the flashing cursor is under a digit the maximum number has been
entered.
4. One or more 'pause' digits can be entered between successive digits of phone
access /deaccess codes by pressing
(#). A pause digit is displayed as '-' (a dash). A pause digit causes the radio to wait
in between transmission of the DTMF tones programmed before and after the
pause.
5. Press the Toggle Light/Enter Button to store the new code and return to the SPM
Browse menu
6. To abort the data entry, select another menu item by turning the selector switch
or wait until the edit mode times-out (after 5 seconds of inactivity).
(Right Arrow) to scroll through the channels (01
(Left Arrow) or
(Lock/*) immediately followed by
(Right
(X) to erase unwanted