Motorola GP68 Operation Manual page 18

A high performance radio in a class of its own

Hide thumbs Also See for GP68:

If your radio is equipped with the Voice Selective Call option, your radio can be

called individually by another user, or as part of a small group.

Receiving a Voice Selective Call

When the radio decodes a Voice Selective Call, the LCD indicates the type of

SelCall message being received as follows:

Individual Call

Group Call

All Call

In the case of an Individual Call, you hear two short ringing tones. For other calls,

you hear two medium pitched 'beeps'.

NOTE: Alert tones are not heard if either SelCall Tone Status or Alert Tone Volume

is set to 'Off'.

For an Individual Call, the radio automatically transmits an Acknowledgement

message back to the calling radio, If an Acknowledgement ID has been

preprogrammed by the dealer. When the radio decodes a Voice Selective Call, it

enters the carrier squelch mode for a period of time. If there is no receive activity the

radio resumes the selected squelch mode and the LCD reverts to the appropriate

receive mode display.

IMPORTANT: If you change the selector switch or press any buttons while the

Selective Call signal is in progress, the SelCall message disappears and the

Selective Call is lost.

Sending a Voice Selective Call

Press and hold PTT, then dial the required Selective Call ID.

Release PTT and await a response.

NOTE: For an Individual Call, the radio indicates that the call was received with two

short ringing tone.